Specifications

Section 4.4 ADSL ATM UIG Total Access 600 Series System Manual
220 © 2002 ADTRAN, Inc. 61200624L1-1A
Configuring the Router – Configuration
Use the ROUTER/CONFIGURATION menu (Figure 30) to access the GLOBAL, ETHERNET, and WAN menus.
Figure 30. Router/Configuration Menu
>Global
Use the GLOBAL menu (Figure 31) to set up general router functions.
Figure 31. Global Menu
IP
This is used for general IP configuration.
Mode
This item controls how the Total Access 600 handles IP routes. When this option is set to ON (def), the
Total Access 600 will advertise and listen to routes from other IP routers. If
OFF, the route table is still
used, but only static routes are used for routing IP packets and only the Ethernet port is used. IP packets
can be sent over the WAN, but only when bridged.
Static Routes
Use this menu to enter static routes to other networks.