Specifications

Section 4.3 T1 ATM UIG Total Access 600 Series System Manual

Status

This displays the current status of the time negotiation process. If an error is displayed, check all connections

and configurations to try to resolve the problem.

System Utility

Use the SYSTEM UTILITY menu to view and set the system parameters shown in Figure 5.

Figure 5. System Utility Menu

>Upgrade Firmware

Updates firmware when Total Access 600 enhancements are released. Two transfer methods are available

for use in updating the Total Access 600 system controller.

Transfer Method

The two methods for upgrading are XMODEM and TFTP. (See DLP-007, Upgrading the Firmware Using

XMODEM and DLP-008, Upgrading the Firmware Using TFTP for more information.) TFTP requires a

TFTP server running somewhere on the network. The Total Access 600 starts a TFTP client function which

gets the upgrade code from the TFTP server. Selecting XMODEM will load the upgrade code through the

CRAFT

port using any PC terminal emulator with xmodem capability.

TFTP Server Address

This is required when the transfer method is TFTP. It is the IP address or domain name (if DNS is config-

ured) of the TFTP server.

TFTP Server Filename

This is required when the transfer method is TFTP. It is the case-sensitive file name which contains the

upgrade code.

Transfer Status

This appears when TFTP is used. It displays the status of the transfer as it happens. Any error or success

message will be displayed here.