Specifications

Section 4.2 T1 TDM UIG Total Access 600 Series System Manual

ROUTER

Configure the router parameters and view routing statistics from this menu as shown in Figure 8.

Figure 8. Router Menu

ROUTER > CONFIG

Configure the interfaces, routes, DHCP Server, and UDP Relay options from this menu.

ROUTER > CONFIG > INTERFACES

Configure the layer 3 options for the Ethernet and T1 interfaces from this menu.

ROUTER > CONFIG > INTERFACES (ETH[1])

Configure the layer 3 options for the Ethernet parameters from this menu.

The 1 in ETH[1] represents a physical port. The Ethernet physical port will always be 1.

The Ethernet port will always appear in the Router > Config > Interfaces table regardless

of the L2 protocol mode setting.