MSDS

ProVent MATERIAL SAFETY DATA SHEET
ADO Products
Page 1 of 2
PRODUCT INFORMATION
Date: January 1, 2002
Product: ProVent made from High Impact Polystyrene
Product Grade: 6000, 6100, 6300, 6400, 6500, 6600, 6700, 6800
Chemical Family: Rubber Modified Polystyrene Thermoplastic Polymer
Contact: ADO Products Phone: [phone]
Box 236 Fax: [phone]
Rogers, MN 55374
HAZARDOUS INGREDIENTS/IDENTITY INFORMATION
This product does not meet the definition of a hazardous chemical given in 29CFR. Part
1910.1200 (OSHA). Pigments or additives are encapsulated in plastic and therefore any
level of hazard is considered negligible.
PHYSICAL DATA
Form: Solid
Odor: None
Melting Point: Softens at 170°F to 230°F
Vapor Pressure: N/A
Volatile By Volume: N/A
Vapor Density: N/A
Evaporation Rate: N/A
Solubility in Water: Negligible (below 0.1%)
REACTIVITY DATA
Incompatibility: May react to strong oxidizing agents: chlorates, nitrates, peroxides, etc.
Stability: Stable
Hazardous Decomposition: Carbon monoxide, carbon dioxide, carbon, water
Hazardous Polymerization: None
FIRE & EXPLOSION DATA
Flash Pt. And Method Used: N/A
Extinguishing Media: Water fog, carbon dioxide, and dry chemical
Special Fire Fighting Instructions: Use approved self-contained breathing apparatus and approved
personal protective clothing.
Unusual Fire and Explosion Hazards: Fire gives off dense black smoke, carbon monoxide, and
carbon dioxide.
AVOID PROCESSING OF MATERIAL OVER 300°C (575°F)