ADJUSTABLE AFFORDAMATIC 2.0 ASSEMBLY INSTRUCTIONS 126019-5120 126019-5130 126019-5150 126019-5160 Issued Date:4.7.
PART LIST Power Adapter x 1 (Pre-assembly on frame) Control Box x 1 (Pre-assembly on frame) Retainer Bar Twin XL Full Queen Size x 1 King Size x 2 Remote x 1 Head/Foot Actuator x 1 (Preassembly on frame) Legs x 6 2pcs are pre-assembly on frame
STEP 1: Carefully take out the bed frame and open it as shown.
STEP 2: Cut all five (5) zip ties and remove all parts from the box.
STEP 3: Thread the bolt of the leg into frame and turn by hand until tight.
STEP 4: With two people, carefully flip over the base. Then insert the mattress retaining bar into the grommets as shown. .
STEP 5: When ready to flip the base over, make sure you do not use the legs as leverage as they may damage the legs and/or base. Place mattress on top of base, ensuring edge of mattress makes contact with retaining bar to ensure no slipping.
Remote Instructions HEAD UP : Press and hold to raise the head section. FOOT UP: Press and hold to raise foot section. HEAD AND FOOT UP: Press and hold to raise the head and foot section at the same time. HEAD DOWN : Press and hold to lower the head section. FOOT DOWN: Press and hold to lower foot section. HEAD AND FOOT UP: Press and hold to lower the head and foot section at the same time.
PAIRING HINT: To pairing, hold all three buttons at the same time. Pairing ONE REMOTE: Each bed frame comes from the factory paired to its own remote. If not paired,Please follow these instructions: Step 1：Push the recover button on cord underneath the bed, hold the “head down” button and the “foot up” button on the remote at the same time for 10 seconds. Step 2：Once you hear a beep that will indicate that the remote is paired.
Synchronization SYNCING TWO TXL BASES FROM ONE REMOTE: Each bed frame comes synced to its own remote. You can use only one remote so put the 2nd remote away for safekeeping. Bed “A” is already paired. Step 1: Unplug bed “A” and take the “A” remote and sync it to bed “B”. Step 2: Press and hold the “head down” button and the “foot up” button on the remote and push the recover button on cord underneath the bed “B” at the same time for 10 seconds.
Questions & Answers Q：The Control box is not working. A: Re-check the power supply. Q: The Control box's signal lost. A:Re-check battery capacity. Q: The remote is not working. A: Re-check the power supply. Q: The remote can not control. A: 1.unlock child lock. 2.Stop the study function. Q: There is Button failure in remote. A: Change the remote. Q: The massager are not working and very noisy. A: Change massager. Q: Motor is not working. A: 1.Change motor 2.Change control box.
ADJUSTBALE BED FRAME 3-YEAR LIMITED WARRANTY LIMITED WARRANTIES: The following limited warranties apply to new Adjustable Bed Frame and are extended only to the original retail purchaser of the Adjustable Bed Frame Product. These limited warranties are non-transferable. The “adjustable bed frame” does not include the mattress. “Warranty Commencement Date” means the date you purchased a new and unused adjustable bed frame.
Call Us First! Questions about your Adjustable Bed? We Can Help! Classic Brands stands behind all of our products and our 5-star Customer Service is committed to resolving any issue, so if you have any questions or concerns, please email us at azcustomerservice@classicbrands.
