Model # 629-204 QUADRUPLE LOCKER ssembly & installation guide Four Tier Locker ADI629-204-SERIES USER GUIDE
Thank you for your purchase. AdirOffice has a commitment to deliver quality and stylish office furniture and equipment. We understand starting and maintaining a business is expensive enough. We can help you make it cost effective and beautiful. Plus, our expert team makes sure everything you need works as efficiently as possible.
Table of Contents 1 Introduction 2 Parts List 4 Assembly Instructions 10 Installation Instructions 12 Notes 15 Limited Warranty 16 Disclaimer
Introduction INTRODUCTION The AdirOffice Four Tier Locker is designed to provide storage and security for your home or office. The lockers are conveniently that theyto can be installed with if desired. The AdirOffice Quadrupledesigned Locker isso designed provide storage andmultiple securityunits for your home or office. The lockers are conveniently designed so that they can be installed with multiple units if desired. Single Unit Use a single, standalone unit.
Parts Included INCLUDED HARDWARE: Nuts Flat Head Screws Keys x4 x4 x8 4 sets of 2 keys Wall Anchors Round Head Screw Coat Hooks x10 x4 Bolts + Washers Bolts x2 + Washers 1. Bolts (x4) x4 2. Washers (x4) Nuts 3. Nuts (x4) x4 Keys Flat Head Screws 4. Double Hooks (x4) x8 5. Keys (4 Sets of 2) 4 sets of 2 keys REQUIRED TOOLS: Not included Phillips Screwdriver 4 Drill + Drill Bit Wall Anchors Round Head Screw x2 6. Wall Anchors (2) x10 7. Round Head cs@adiroffice.
PARTS Parts Included Door Panel Quadruple Locker Left Panel A. B. C. D. Top Panel Back Panel E. Right Panel F. Middle Panels G.
Assembly Instructions ASSEMBLY INSTRUCTIONS STEP 1: A. Place the Left Panel (B) onto the left side of the Back Panel (D). Quadruple Locker B. Line up the “C” shape of the Left Panel (B) so that it hooks under the “L” shape of the Back Panel (D). C. A djust as needed so that the screw holes line up. Using a Phillips screwdriver and the included Round Head Screws (7), secure the two panels together at the points shown. 1.
ASSEMBLY INSTRUCTIONS Quadruple Locker Assembly Instructions STEP 2: right panel to back panel 2. Attach A. Place the Right Panel (E) onto the right side of the Back Panel (D). Ɣ Place right panel theshape right side the back B. Lthe ine it up so thatonto the “C” of theofRight Panelpanel. (E) hooks under the “L” shape of the Back Panel (D), as described in Step 1. Ɣ Line it up so that the “C” shape of the right panel hooks under the “L” shape of the back panel, Adjust asinneeded asC. described Step 1.
ASSEMBLY INSTRUCTIONS Assembly Instructions STEP 3: Quadruple Locker A. Stand the 3 assembled sides of the locker up. B. To attach the Door Panel (A) piece, move the Door Panel (A) into the locker at an angle so that it is completely inside of the enclosure. 3 Attach door panel C. There is a “pocket” located at the top and bottom of each side panel into which the Door Panel (A) should insert. Ɣ Stand the 3 assembled of the locker that up. the panel inserts into the “pocket” on each panel, as D.
Assembly Instructions STEP 4: A. Once the Door Panel (A) is attached, it is time to secure the Door Panel (A) by attaching the Top Panel (C), Middle Panels (F) and Bottom Panel (G). B. Set the Top Panel (C) on top of the locker and screw it into place with 2 Round Head Screws (7) with the hook facing out. C. Open the Door Panel (A) and secure it using the screwdriver and Round Head Screws (7) at each corner, where shown. D.
Assembly Instructions C C B B A C A 7 D D H A F F F E B F D A G A E B E 7 B D G D 8
ASSEMBLY INSTRUCTIONS Assembly Instructions Quadruple Locker STEP 5: A. A ttach the Double Hooks (4) to the Back Panel (D) using a Phillips screwdriver and the included Round Head Screws (7). 5. Attach coat hooks Ɣ Attach the coat hooks to the back panel using a Phillips 7 screwdriver and the included screws.
INSTALLATION INSTRUCTIONS Quadruple Locker Installation Instructions Multiple Locker Units Before you begin If you are using multiple locker units, secure them to each other for safety and security. A. Set the next each Ensure the mounting holes towards the top of the Mount the lockers locker(s) to atowall forother. optimal safety. Right Panel (E) of the left locker line up with the corresponding mounting holes on the Left Panel (B) of the right locker. B.
INSTALLATION INSTRUCTIONS Installation Quadruple Locker Instructions Mounting Locker Units A. There are two holes near the top of the Back Panel (D) of your locker. B. Place your where you want to install it. Using a pencil, mark the Mounting thelocker locker unit(s) to the wall location of each of these holes on the wall. C.are Remove the locker(s) wall.
Notes 12
Notes 13
Notes 14
Limited Warranty 1. A dirCorp (the company) warrants to the purchaser that the product will be free from defects in workmanship and materials for a period of one (1) year from the date of purchase. 2. These warranties are not assignable or transferable to any other person. 3.
Disclaimer By purchasing products from AdirCorp, user agrees as follows: TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE PRODUCTS AND INFORMATION ON THIS SITE IS PROVIDED “AS IS” AND WITH ALL FAULTS AND ADIRCORP. MAKES NO PROMISES, REPRESENTATIONS, OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO THE PRODUCTS AND INFORMATION, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND ADIRCORP.
Item Number: ADI629-204-SERIES 64 Mountainview Blvd. • Wayne, NJ • 07470 • © 2021 AdirCorp adircorp.