Datasheet

ManualsBrandsAdd-On Computer Peripherals (ACP) ManualsNetworking10G-SFPP-ER-AO

AddOn Computer Phone: 877.292.1701

Page 1 of 4

10G-SFPP-ER-AO

BROCADE, 10BASE-ER SFP+

1550NM 40KM REACH LC

10G-SFPP-ER-AO

10Gbase SFP+ Transceiver

Features

• Compliant to SFP+ Electrical MSA SFF-8431

• Compliant to SFP+ Mechanical MSA SFF-8432

• Multi-rate compliance for Ethernet and Fiber Channel

• Transmission distance up to 40km over SMF

• 0°C to +70°C case operating temperature range

• 1550nm EA-DFB Transmitter

• RoHS 6/6 compliant

• Operating data rate up to 10.3Gbps

Product Description

The 10G-SFPP-ER-AO Transceiver is a single mode transceiver is small form

factor pluggable module for duplex optical data communications such as

10GBASE-ER/EW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector

to allow hot plug capability.

Functional Description

This module is designed for single mode fiber and operates at a nominal

wavelength of 1550 nm. The transmitter section uses a 1550nm multiple

quantum well DFB, which is class 1 laser compliant according to International

Safety Standard IEC-60825. The receiver section uses an integrated InGaAs

detector preamplifier (IDP) mounted in an optical header and a limiting post-

amplifier IC.

Summary of content (4 pages)

PAGE 1
0G-SFPP-ER-AO BROCADE, 10BASE-ER SFP+ 1550NM 40KM REACH LC 10G-SFPP-ER-AO 10Gbase SFP+ Transceiver Features • • • • • • • • Compliant to SFP+ Electrical MSA SFF-8431 Compliant to SFP+ Mechanical MSA SFF-8432 Multi-rate compliance for Ethernet and Fiber Channel Transmission distance up to 40km over SMF 0°C to +70°C case operating temperature range 1550nm EA-DFB Transmitter RoHS 6/6 compliant Operating data rate up to 10.
PAGE 2
10G-SFPP-ER-AO BROCADE, 10BASE-ER SFP+ 1550NM 40KM REACH LC Electrical and Optical Characteristics Rating Conditions Symbol Min Max Units Storage Ambient Temperature Range Ts -40 +85 °C Powered Case Temperature Range Jc 0 +75 °C RH 0 95 % VCC3 -0.5 3.6 V <1.5 W Operating Relative Humidity Non condensing Supply Voltage Range @ 3.
PAGE 3
10G-SFPP-ER-AO BROCADE, 10BASE-ER SFP+ 1550NM 40KM REACH LC Temperature Internally measured temperature data is represented as two’s complement of a signed 16-bit value in increments of 1/256 °C over a range of -40 to +100°C. Accuracy is better than +/-3%. Supply Voltage (VCC) Internally measured supply voltage. Represented as a 16-bit unsigned integer with the voltage defined as the full 16 bit value (0 – 65535) with LSB equal to 100 µVolt, which yields to a total range of 0 to +6.55 Volts.
PAGE 4
10G-SFPP-ER-AO BROCADE, 10BASE-ER SFP+ 1550NM 40KM REACH LC Laser Eye Safety CDRH 21 CFR 1040.10 and 1040.11 IEC 60825-1 Rev2 2007 Laser Class 1 according to FDA Laser Class 1 according to IEC Rev2 ESD & Electromagnetic compatibility Add-On Computer Peripherals SFP+ modules are designed to withstand high ESD voltages. Its excellent performances in terms of EMI allow system designers to integrate the module in high density applications.