Product Manual

Mounting Your Device

Mounting Your DeviceMounting Your Device

Mounting Your Device

For convenience, you may mount your unit on the wall or attach it to a mobile stand or a

tabletop stand. A storage basket is included and can be used to hold cuffs, boxes of probe

covers for the optional temperature module, and SpO

sensors for the optional pulse oximetry

module. All compatible accessories for mounting your

ADview

can be found in the list

starting on page 61. All versions of the

ADview

can be mounted in the following ways:

Mounting the Device on a Wall

Mount the

ADview

on the wall in place of an

aneroid manometer. To affix your

ADview

to the

wall:

1. Attach the bracket to the wall using 4 wall screws, and the basket using 2 screws.

2. Attach the wall bracket adapter to the rear panel of the BP device using the 3 screws.

3. Position the adapter onto the rivets of the wall bracket and slide the device down

until it locks into place.

The weight of the contents of the wall-mounted storage basket should

never exceed five pounds. Please do not store heavy items in the storage

basket.

Affixing the Device to a Mobile Stand

Attaching the

ADview

to a mobile stand facilitates portability. To

mount the

ADview

to the mobile stand:

1. Assemble the mobile stand according to the manufacturer’s

directions.

2. Using the three thumb screws, secure the rear panel of the BP device to the stand.

Placing the Device on a Tabletop

Use the

ADview

with the tabletop stand to make it easier to carry

with you. To mount the

ADview

to the tabletop stand:

1. Using the three thumb screws, secure the rear panel of the

BP device to the stand.