User's Manual
Table Of Contents
Appendix B: 75-Ohm CATV Cable
InterReach Spectrum Remote Access Unit Installation Guide Page 17
ADCP-77-168 • Issue 1 • 09/2010 © 2010 ADC Telecommunications, Inc.
• Use only RG-6 CATV cable between the MRAU and SRAU, the lengths of which
are listed below.
Belden 1695A Coax Specifications
Description
RG-6/U type, 18 AWG solid 0.040-inch bare copper conductor, plenum, foam FEP
insulation, Duofoil
®
+ tinned copper braid shield (95% coverage), Flamarrest
®
jacket.
Overall Physical Characteristics
Conductor One Coax
18 AWG
Solid stranding
Bare Copper (BC) conductor material
0.040-inch diameter
Insulation Teflon
®
Foam Fluorinated Ethylene Propylene (FFEP)
0.170-inch diameter
Outer Shield Layer 1 Duofoil
®
Tape
Aluminum Foil-Polyester Tape-Aluminum Foil
100% coverage
Outer Shield Layer 2 Braid
Tinned Copper (TC)
95% coverage
Outer Jacket Flamarrest
®
Low Smoke Polyvinyl Chloride (LS PVC)
Overall Cabling 0.234-inch overall nominal diameter
RG-6 Cable Meters Feet
Typical 2 6.56
800/900 iDEN to 850 CELL 6 19.68
800 AWS to 850 CELL 6 19.68