User's Manual

System Information
FlexWave Prism Element Management System 7.1 User Manual Page 105
ADCP-77-177 • Issue 1 • July 2011 © 2011 ADC Telecommunications, Inc.
Viewing the Linked DARTs Report
To access the Linked DARTs report, in the System Menu bar, click System Information >
Get Information, and then in the Reports panel Type list, select Link.
The Linked DARTs table provides the following information:
• Host columns—identifies the Host and its elements
– DART Id—number of the Host slot in which the DART is installed
– DART Name—user-defined name for the Host DART
– SFP Id—port number of physical optical port where Host-Remote optical fiber
is connected on the Host.
– SFP Name—user-defined name for the Optics port.
• Remote columns—identifies the Remote and its elements
– Id—Unit ID of PRU/URU based upon layered address; see “Unit
Identification” on page 43
– Name—user-defined label for the PRU/URU
– SFP Id—identification (Id) of Remote side SFP connected toward the Host
DART (can be from 1 through 8)
– SFP Name—user-defined name for the Optics port
– DART Id—PRU/URU slot number in which the DART is installed
– DART Name—user-defined name for the Remote DART
– Timeslots—number of timeslots assigned to the link.
• Common columns—identify configuration settings that are common to the Host
and connected Remote(s)
– Passband—type of passband provided by the DART
– Frequency—passband frequency of the DART
– Diversity—whether DART is configured as Diversity or Non Diversity. For this
release, this will always be Non Diversity.