User's Manual

Initial FlexWave Prism System Setup
FlexWave Prism Element Management System 7.1 User Manual Page 69
ADCP-77-177 • Issue 1 • July 2011 © 2011 ADC Telecommunications, Inc.
• Tx Power (dBm)—launch power level in dBm of forward path signal.
– LongRange (LR)
 minimum is -2 dBm
 maximum is 3 dBm.
– IntermediateRange (IR)
 minimum is -5 dBm
 maximum is 0 dBm.
• Rx Power (dBm)—receive power level in dBm of reverse path signal, which
incorporates the launch power of the Remote Unit SFP plus all optical losses
(insertion losses, fiber cable loss, and so forth).
– LongRange (LR)
 minimum is -27 dBm
 maximum is -9 dBm.
– IntermediateRange (IR)
 minimum is -18 dBm
 maximum is 0 dBm.
• Remote Name or Host Name—when a Host Unit is selected in the System Tree, the
Configure Optical Ports table provides a column for Remote Name, which is name of
the Remote Unit connected to this Optics port. When a Remote Unit is selected
in the System Tree, the Configure Optical Ports table provides a column for the Host
Name, which is the name of the Host connected to this Optics port.
• Alarm Status—whether an alarm is active. If an alarm is active, there will be a
Minor or Major link that you click to open a dialog that defines the active alarm,
as described in
“Viewing Alarm Details” on page 45. The background color of
the Alarm Status cell also indicates the alarm level (see “Alarm Color Codes” on
page 44).