User's Manual

Using the Prism EMS

FlexWave Prism Element Management System 7.1 User Manual Page 43

NOTE: The View Frame is designed to update its contents within a web browser approximately

every 20 seconds.

Unit Identification

Figure 17 shows the Unit ID in the System Tree. The Unit ID is the hostname

(user-defined label) plus the layer address. The layered address is H-R, so the Unit

ID is <hostname>H-R, where:

• H—Host # is always 1

• R—Remote Unit # (PRU or URU), which can be 1 - 8 and is based on the SFP

port number to which the Remote Unit is connected

Figure 17. System Tree Unit IDs

Table 12. View Frame Elements

ID # Element Description

1 Panel

A panel is a grouping of fields or parameters enclosed within a grey box, with the panel title in the

upper-left corner.

Selection box/Radio

button

A square box is a selection box that you click on to select or deselect an option. When selected, a

checkmark displays in the box. When the option is deselected, the box is empty.

If the selection box is round, it is referred to as a radio button. When a radio button is selected, the

round “button” is filled in. When a radio button is deselected, its circle is empty.

3 List

A menu that lists the options for the corresponding parameter. Click on the down arrow to display

the list.

4 Text box A text box allows you to enter custom information for the corresponding field.

5 Operational buttons

Execute the command for which the button is labeled. When a button is greyed out, that function is

not available.

6 Table

A table collects information that corresponds to the EMS View Frame and provides it in table format.

The table is enclosed within a panel, with the table title in the upper-left corner.