User's Manual

View Optical Ports
Page 150 FlexWave Prism Element Management System 7.1 User Manual
©
2011 ADC Telecommunications, Inc ADCP-77-177 • Issue 1 • July 2011
• Wavelength (nm)—wave length transmitted through this port:
– Non-duplex and WDM configurations: 1550 nm fwd or 1310 nm rev
– CWDM configurations can be one of eight wavelengths:
• Tx Power (dBm)—launch power level in dBm of forward path signal. The minimum
FWD launch power is -2 dBm, and the maximum is 3 dBm.
• Rx Power (dBm)—receive power level in dBm of reverse path signal, which
incorporates the launch power of the Remote Unit SFP plus all optical losses
(insertion losses, fiber cable loss, and so forth).
• Host Name/Remote Name—dependent on the unit selected in Step 1 on page 149:
– If a Host Unit was selected, then the column is labeled Remote Name and the
data in the column pertains to the Remote connected to this Optical port
identified in SFP Number and SFP Name.
– If a Remote Unit was selected, then the column is labeled Host Name and the
data in the column pertains to the Host (for selected PRU/URU) connected
to this Optical port identified in SFP Number and SFP Name.
• Alarm Status—whether an alarm is active. If an alarm is active, there will be a
Minor or Major link that you click to open a dialog that defines the active alarm,
as described in
“Viewing Alarm Details” on page 45. The background color of
the Alarm Status cell also indicates the alarm level (see “Alarm Color Codes” on
page 44).
 1470 nm  1510 nm  1550 nm  1590 nm
 1490 nm  1530 nm  1570 nm  1610 nm