User's Manual

How to Use the EMS Graphical User Interface
Page 44 FlexWave Prism Element Management System 7.1 User Manual
©
2011 ADC Telecommunications, Inc ADCP-77-177 • Issue 1 • July 2011
Viewing Parameters and Alarms
You can view any parameter or alarm by navigating to the page in which the
parameter or alarm resides. To quickly find information about a parameter or
alarm:
• All parameters are listed alphabetically in this manual’s Index.
• All alarms are listed alphabetically in this manual’s Index of Alarms.
• All traps are listed alphabetically in this manual’s Index of Traps.
Alarm Color Codes
Alarms are color coded in the GUI according to the level of the alarm:
• Green—No alarm
• Blue—Information alarm, which provides information on a successful user
action, such as a change in a forward or reverse delay setting
• Yellow—Minor alarm
• Red—Major alarm
• Gray—the alarm has been disabled; see “Enable and Disable Host and Remote
Unit Alarms” on page 178
• White—a device has not been installed. For example, in Figure 18, which shows
the Unit Information > View Status page, the Module Status table shows that a DART
has not been installed in slots 3, 7, or 8. The Optical Status table shows that SFPs
are not installed in Optical ports 2 through 8.
Figure 18. Understanding Color Codes for Empty Slots