User's Manual Part 1

December 20, 2004 SCP-LPS20x-011-012-01H
ADC Telecommunications, Inc. 49
CONNECTION SECURITY
To maintain the integrity of the configuration settings, only one user can be connected to the management tool at a
given time. To prevent the management tool from being locked up by an idle user, two mechanisms are in place:
• If a user’s connection to the management tool remains idle for more than ten minutes, the LPS-20x auto-
matically logs the user out.
• If a second user connects to the management tool and logs in with the correct username and password,
the first user’s session may be terminated depending on system configuration. Refer to Manage-
ment|Management Tool|Login override.
HTTPS
Communications between the management station and the LPS-20x occurs via HTTPS. Before logging into the
management tool, users must accept an ADC certificate. You can replace this certificate with your own. For more
information, refer to SSL Certificates on page 139.
SECURITY SETTINGS
The LPS-20x can be managed both locally and remotely for complete flexibility. Management occurs via the Web-
based management tool which resides on the LPS-20x. For details, refer to Management Scenarios on page 36.
To Configure Security Options
1. On the main menu, click Management. The Management tool configuration page opens.
2. In the Security box, enable the management options you require. The options are described in the section
that follows.
3. Click Save.
!
IMPORTANT
If you do not log out, the LPS-20x continues to maintain your connection as active until it times
out (after 10 minutes of inactivity). During this period, no other user can connect to the
management tool unless Login override under Management|Management Tool is checked.