User Manual

Fusion Wideband Installation Procedures
7-40 InterReach Fusion Wideband Installation, Operation, and Reference Manual
CONFIDENTIAL D-620616-0-20 Rev G
Using AdminBrowser
To access Fusion Wideband using AdminBrowser, use the following steps:
1. Make sure the Main Hub “Status” LED is green.
2. Launch your web browser, type
Https://192.168.0.100
in the URL line, and click Go.
3. When AdminBrowser appears, log in using the default user ID: operator, and the
default password: password.
4. Click System Configuration and then click Set Date/Time. A window similar to
Figure 7-23 appears.
Figure 7-23 Set Time and Date Window
5. Enter the desired time and date in the format indicated in the window and click
Set Date/Time. A window appears requiring you to reboot the system for the new
date and time to take effect.
6. Select the Fusion Wideband Main Hub and click Install/Configure System. A
window similar to the Figure 7-24 appears.