User's Manual Part 9

Commands Section 9
Element Management System (EMS) 4.0 User Manual
106
Examples
DEMS MainTower GET DATA 3P3Volt
DEMS MainTower GET DATA ALL
DEMS ALL GET DATA ALL
5.5.8 GET STATUS
This command can be used to determine the status of a network element identified
with a site name or node number. The information returned includes all parameter
values and all alarm values.
To obtain a status display
1. Enter a command in the following format
DEMS Site_Name GET STATUS
(or)
DEMS Node_Number GET STATUS
where Site_Name is the site name of the network element and
Node_Number is the Host Node or Remote Node value (as displayed in the
Maintenance interface View Catalog window). Use
Site_Name = ALL to
query for all network elements.
2. Look for a response consisting of all alarm names, each paired with the cur-
rent alarm value, plus all parameter names, each paired with the current value
for that parameter.
Examples
DEMS WasecaAmoco GET STATUS
DEMS 37 GET STATUS
DEMS ALL GET STATUS
5.5.9 GET RECORD
This command can be used to determine the current time interval (in minutes and
seconds) being observed by NOC–NEM in recording network element status.
Once per this interval, NOC–NEM queries the network element to obtain status