Manual

AMI Reference Manual
34
Output devices not
responding/not
responding proper-
ly
AMI is not receiving
power.
Check that the AMI is
receiving power (also
refer to probable causes
and corrective actions
under “No operation or
improper operation,”
page 29).
No response to oil
or guards switches
(cont’d)
Symptom Probable Cause
Recommended
Corrective
Action
Ensure that all of the
wires are secure beneath
the screw(s) on the J2
connector. Disconnect
power to
MILLPWR and
the AMI. Completely
loosen each screw on the
connector. One by one,
reinsert each wire into
the connector, under the
body of the screw.
Tightening each screw as
you do so.
Improper wiring (cont’d)