Instructions / Assembly

8"8"

12"

Active Ventilation Products, Inc.

Website: roofvents.com Email: sales@roofvents.com

Pitch Pan PP-8x8-H8

Inner Diameter = 8", Outer Diameter = 12", Height = 8"

7/30/2021

Installation Instructions

1. Slide pitch pan around plumbing or electrical conduit.

2. To install pitch pan onto the roof deck, use one screw or roofing nail per

flange. The screws should be approximately in the center of the flange.

3. Total number of screws or nails needed for flanges = 8

4. To close the pitch pan, use two, #8 x 1/2" screws

5. Recommended installation screw: #10 x 1 1/2" Steel Sheet Metal Screw,

Pan Head, Phillips Drive. Type "A" Point, Zinc Plate Finish

6. Flash pitch pan onto roof according to specifications of the roof

manufacturer.

7. Screws not included.

Pitch Pan Flashing Detail

A/C

Unit

Wood nailer

Insulation

Roof Deck

Membrane

Pourable Sealer

Fastener