- Actiontec Electronics DataLink V.90 PC Card Fax Modem User Guide

4 Installing the Driver Software

DataLink V.90 PCMCIA Fax Modem

4. The “Install From Disk” window appears. Insert the DataLink Installation

CD in the CD-ROM drive of the computer, then click OK.

5. If Windows asks for an installation disk, click OK and enter the drive letter

of the CD-ROM drive in the “Copy manufacturer’s les from” text box.

Click OK again. The driver sofware is installed.

6. To determine which COM port and IRQ are assigned to the Modem, select

Start, Settings, Control Panel, Modems, then Diagnostics. Click COM

Port, then More Info to view the Modem’s properties. ”

Next, go to chapter 5, “Installing the Communications Software.”