Hardware Manual

www.acti.com
Hardware Manual
13
Installing the Camera with the Surface
Mount
This section describes the procedures in directly mounting the camera on a flat surface, such
as wall or ceiling, with the use of the bundled surface mount. The main unit can be installed
apart from where the camera is mounted, like in a secured area or separate room.
Before installation, determine the location to mount the camera and the main unit. Consider
that the camera cable is 12 meters long.
Step 1: Mount the Camera
1. Determine the location to install the camera and how the cable will be routed.
2. Attach the camera to the surface using the two (2) bundled screws.
3. Attach the surface mount to the camera.
TIP: The white surface mount provides clean and neat-looking installation. For surface
with different colors or themes, the surface mount can easily be painted to blend with its
environment.