User's Manual

!AcroLAN Card User’s Guide Version 20002.5

Page 27 of 38

5.4 AcroLAN Configuration Utility

Acrowave install shied program installs wireless LAN driver program and Configuration

Utility program. You can see the icon at the right bottom of your screen. Click on that

icon will show you the screen as show below.

Status shows wireless LAN card’s MAC address information.

Current Tx Rate shows transmit data rate.

Current Channel shows selected channel number.

Channel number is the channel available for the communications between the client

and AP or between the clients only. In case of the Infrastructure Network Mode, the

channel number scanned automatically, while in case of the Ad-hoc Network Mode, the

channel number is set by the client and can be changed by the client user.

If you click on Rescan button, LAN card program searches other new channel that

currently used one.

Throughput (Byte/sec) shows transmit/receive data rate.

Link Quality shows measured radio link quality. If the link quality is bad, your computer

may not communicate with other client computers. Otherwise (; fair, good…), there is

no problem to communicate with other clients.

Signal Strength is similar to Link Quality information but slightly differ from it. But

Wireless Link Status

Wireless Link StatusWireless Link Status

Wireless Link Status