02052 AI

ManualsBrandsACME Furniture ManualsBunk & Loft BedsTritan Blue Twin Over Queen Metal Kids Bunk Bed

ASSEMBLY INSTRUCTIONS

MODEL: 02052 PAGE 1 OF 4

NOTE: THIS ITEM NOT RECOMMENDED FOR COMMERCIAL USE

KEEP THIS DOCUMENT FOR REFERENCE IN CASE PARTS ARE NEEDED

DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED!!

BED PARTS

HARDWARE PARTS

№

DESCRIPTION

QTY

№

DESCRIPTION

QTY

Left Side Panel

1 PC

Hex-Head ￠1/4”*35mm Bolts

2 Pcs

Right Side Panel

1 PC

Hex-Head ￠1/4”*75mm Bolts

8 Pcs

Bottom Frame

1 PC

Hex-Head ￠1/4”*60mm Bolts

16 Pcs

Top Frame

1 PC

￠1/4” locked Nuts

10 Pcs

Guardrails

2 PCS

￠1/4”*20mm Nuts

8 Pcs

Supporting Leg

2 PCS

Curved Washers

24 Pcs

Metal Holder

2 PCS

Washers

12 Pcs

Allen Wrenches

1 Pc

Plastic pads

4 Pcs

Open wrench

1 Pc

Summary of content (4 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS MODEL: 02052 PAGE 1 OF 4 NOTE: THIS ITEM NOT RECOMMENDED FOR COMMERCIAL USE KEEP THIS DOCUMENT FOR REFERENCE IN CASE PARTS ARE NEEDED DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED!! BED PARTS № DESCRIPTION A HARDWARE PARTS QTY № 1 PC 1 Hex-Head ￠1/4”*35mm Bolts 2 Pcs 1 PC 2 Hex-Head ￠1/4”*75mm Bolts 8 Pcs 1 PC 3 Hex-Head ￠1/4”*60mm Bolts 16 Pcs 1 PC 4 ￠1/4” locked Nuts 10 Pcs 2 PCS 5 ￠1/4”*20mm Nuts 8 Pcs 2 PCS 6 Curved Washers 24 Pcs 2 PCS 7 Washer
PAGE 2
ASSEMBLY INSTRUCTIONS MODEL: 02052 PAGE 2 OF 4 NOTE: THIS ITEM NOT RECOMMENDED FOR COMMERCIAL USE KEEP THIS DOCUMENT FOR REFERENCE IN CASE PARTS ARE NEEDED DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED!! STEP 1 STEP 2
PAGE 3
ASSEMBLY INSTRUCTIONS MODEL: 02052 PAGE 3 OF 4 NOTE: THIS ITEM NOT RECOMMENDED FOR COMMERCIAL USE KEEP THIS DOCUMENT FOR REFERENCE IN CASE PARTS ARE NEEDED DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED!! STEP 3 STEP 4
PAGE 4
ASSEMBLY INSTRUCTIONS MODEL: 02052 PAGE 4 OF 4 NOTE: THIS ITEM NOT RECOMMENDED FOR COMMERCIAL USE KEEP THIS DOCUMENT FOR REFERENCE IN CASE PARTS ARE NEEDED DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED!! Remark: 1. Please always keep the warning lable on the inside of the upper bed end structure permanently. 2. Phillips head screwdriver is required for tightening the self-tapping screws.