Owner's Manual

English

Positioning your mouse

• The mouse should be placed on the same surface as your keyboard so that

you can reach it with ease.

• Adjust its position to allow enough space for movement without making

you stretch or lean over.

• Use your arm to move the mouse. Do not rest your wrist on the table when

moving the mouse.

Connecting peripherals

Setting up your computer is easy. For the most part, you only have four things

to connect: the mouse, keyboard, monitor and power cable.

Note: The peripherals shown in the connections below are

for your reference only. Actual device models may vary in

select countries.

Connecting your mouse and keyboard

USB interface

Plug your USB mouse or keyboard cable into any of the USB ports located

on the front and rear panels of your computer.

PS/2 interface

Plug the PS/2 keyboard cable into the PS/2 keyboard (purple) port on the rear

panel of your computer. Plug the PS/2 mouse cable into the PS/2 mouse (green)

port on the rear panel of your computer.

Connecting a monitor

To connect a monitor, simply plug the monitor cable into the monitor (blue)

port on the rear panel of your computer .

Note: When a VGA card is added to the PCI Express slot, the

monitor should be connected to the add-on card and the

onboard VGA will be disabled.