USB WiFi for Projector User’s Manual Brand:acer Model:UWA2 l Rev. 1.
FCC statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
IC Statement This Class B digital apparatus complies with Canadian ICES-003 and RSS210 This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subjectto the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Canada, avis d'Industry Canada (IC): Cet appareil numerique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210.
Indoor use only for FCC/IC When suing IEEE 802.11abgn wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15 to 5.25GHz frequency range. The requires this product to be used indoors for the frequency range of 5.15 to 5.25GHz to reduce the potential for harmful interference to co channel mobile satellite systems.
The USB WiFi adapter is only for projector .
General Description USB WiFi adapter is a power program to project your PC’s screen player to Projector wirelessly. It also brings you extension display function so that you can show different content in the secondary display. From now on, you can upgrade your Projector, or Monitor with WiFi display function in an easy way.
System Requirements Windows OS: CPU Graphic card Operating System HDD Dual Core Intel Core i 1.
Recommend System Settings l Windows OS: CPU Memory Graphic card Operating System Dual Core Intel Core i5 2.
First installation: 1. Device side: USB WiFi adapter (UWA2) l Plug WiFi dongle and switch to “EZ DisplayàWiFi Display”, it will show welcome page 2. PC/NB side: l Choose “EZ WiFi” in the WiFi SSID list to establish WiFi connection l After successfully connected, open web browser and key in IP shown on welcome page (normally 192.169.111.1) 3. In the web page, choose “Download” and select EZ WiFi program and install it. 4. System will be rebooted once the installation is finished.
Operation: 1. Establish your WiFi connection with device. 2. Find EZ WiFi in your Applications and execute it 3. EZ WiFi will search all connected display devices and list them, select the device/IP you want to use 4. Input the correct 4 digits passcode shown on welcome page 5. The PC’s screen will be displayed out to device and the app screen will change to below look: 6. You can select the display mode and switch Mirror/Extension here.
join your display, please click icon above “Mirror”, to select the place you want to display 7. You can allow max. 4 different sources to display by the layout change 8. Compatible mode: Some applications are using Windows graphic so that their OSD may not be drawn correctly, you can enable “Compatible” mode to resolve this problem. 9. Link: this will enable Web control page on your web browser. *Please be noted the resolution change during WiFi display is prohibited.