Technical information

Chapter 3 107

Replacing the Thermal Module

IMPORTANT: Apply a suitable thermal grease and ensure all heat pads are in place before replacing the Thermal

Module.

The following thermal grease types are approved for use:

• Silmore GP50

• Honeywell

• Jet Motor 7762

The following thermal pads are approved for use:

• Eapus XR-PE

1. Remove all traces of thermal grease from the CPU using a lint-free cloth or cotton swab and Isopropyl

Alcohol, Acetone, or other approved cleaning agent.

2. Apply a small amount of thermal grease to the centre of the CPU—there is no need to spread the grease

manually, the force used during the installation of the Thermal Module is sufficient.

3. Align the screw holes on the Thermal Module and

Mainboard then replace the module. Keep the

module as level as possible to spread the thermal

grease evenly.

4. Replace the six (6) securing screws (in numerical

order from screw 1 to screw 6) to secure the

Thermal Module in place.

5. Connect the fan cable.