User's Manual

English

Appendices

Troubleshooting

If you experience a problem with your Acer projector, refer to the following

troubleshooting guide. If the problem persists, please contact your local reseller

or service center.

Image Problems and Solutions

# Problem Solution

1 No image appears

onscreen

• Make sure all the cables are correctly connected as

described in the "Getting Started" section.

• Ensure none of the connector pins are bent or

broken.

• Check if the projection lamp has been securely

installed. Please refer to the "Replacing the Lamp"

section.

• Make sure you have removed the lens cap and the

projector is switched on.

2 Partial, scrolling

or incorrectly

displayed image

(For PC (Windows

95/98/2000/XP))

• Press "RESYNC" on the control panel or remote

control.

• For an incorrectly displayed image:

• Open "My Computer > Control Panel," and

then double-click the "Display" icon.

• Select the "Settings" tab.

• Verify that your display resolution setting is

lower than or equal to UXGA (1600 x 1200).

• Click the "Advanced Properties" button.

If the problem still appears, change the monitor display

you are using and follow the steps below:

• Verify that the resolution setting is lower than

or equal to UXGA (1600 x 1200).

• Click the "Change" button under the

"Monitor" tab.

• Click "Show all devices > Standard monitor

types" under the SP box, and choose the

resolution mode you need under the "Models"

box.

• Verify that the resolution setting of the

monitor display is lower than or equal to UXGA

(1600 x 1200).