User Guide

20
English
Note: "Saturation" and "Tint" functions are not supported under computer
mode or HDMI mode.
Image
Tint
Adjusts the color balance of red and green.
Press to increase the amount of green in the image.
Press to increase the amount of red in the image.
Projection Front-Desktop
The factory default setting.
Front-Ceiling
When you select this function, the projector inverts the image for
ceiling-mounted projection.
Rear-Desktop
When you select this function, the projector reverses the image so
you can project from behind a translucent screen.
Rear-Ceiling
When you select this function, the projector reverses and inverts
the image at same time. You can project from behind a
translucent screen with ceiling mounted projection.
Keystone Adjust image distortion caused by tilting projection. (±40 degrees)
Aspect Ratio
Use this function to choose your desired aspect ratio.
Auto: Keep the image with original width-higth ratio and maxi
mize the image to fit native horizontal or vertical pixels.
4:3: The image will be scaled to fit the screen and displayed using
a 4:3 ratio.
16:9: The image will be scaled to fit the width of the screen and
the height adjusted to display the image using a 16:9 ratio.