Specifications

PC/II+p Board Technical Reference Manual 33
MT002615 ©1999-2001, Megatel Computer Corporation
7.4 Connectors, Headers and Sockets
Connectors, Headers and Sockets sample part numbers are given in this section, and pinout information can
be viewed from this section by using the links provided in the table below.
All connectors and headers are through-hole type and are normally mounted on the TOP (component) side
of the board. Headers can be top or bottom mounted.
The CPU Socket 7 socket is mounted on the TOP side of the board, while the Flash Disk DIP-32 Socket is
BOTTOM mounted.
Customer-specified connectors, headers and/or sockets, provided they are physically footprint-compatible
with those specified herein, can be custom ordered to ship with your boards.
You can link to the pinout information for any connector, using the table below.
INDEX OF PINOUTS
CONNECTOR DESCRIPTION See
J901, J902
PC/104 Connectors AB and CD Section 7.18.1
J903,
J904
Mass I/O Connectors
(165-pin 2-mm 5X33 grid)
Section 9.1
J903, J904
Power & Miscellaneous Section 9.2
J903
IDE Interface Section 7.12.1
Video CRT Interface
Section 7.28.5
J904
Serial COM1 Interface Section 7.23.1
Serial COM2 Interface
Section 7.23.2
Floppy Disk Interface
Section 7.11.1
Keyboard Interface
Section 7.13.1
Mouse Interface
Section 7.13.2
Panel Interface Section 7.28.6
Parallel Printer Interface
Section 7.17.1
Reset Interface
Section 7.22.1
Speaker Output Interface Section 7.25.1
USB Interface Section 7.27.1
J905
Ethernet Connector Section 7.7.1
J907
Power Connector (+5V) Section 7.19.1
J008
Fan Connector Section 7.8.1