Laptop User Manual
Table Of Contents
- System Specifications
- System Utilities
- Machine Disassembly and Replacement
- Disassembly Requirements
- General Information
- External Module Disassembly Process
- Main Unit Disassembly Process
- Main Unit Disassembly Flowchart
- Removing the Switch Cover
- Removing the Keyboard
- Removing the Antenna Cables
- Removing the LCD Module
- Removing the LED Board
- Removing the Upper Cover
- Removing the Launch Board
- Removing the Speaker Module
- Removing the Finger Print Reader
- Removing the Touch Pad Module
- Removing the Bluetooth board
- Removing the Mainboard
- Removing the Modem Module
- Removing the I/O Board
- Removing the Thermal/Fan Module
- Removing the CPU
- LCD Module Disassembly Process
- LCD Module Reassembly Procedure
- Main Module Reassembly Procedure
- Replacing the CPU
- Replacing the Thermal/Fan Module
- Replacing the I/O Board
- Replacing the Modem Module
- Replacing the Mainboard
- Replacing the Bluetooth Board
- Replacing the Touch Pad Module
- Replacing the Finger Print Reader
- Replacing the Speaker Module
- Replacing the Launch Board
- Replacing the Upper Cover
- Replacing the LED Board
- Replacing the LCD Module
- Replacing the Antenna Cables
- Replacing the Keyboard
- Replacing the Switch Cover
- Replacing the ODD Module
- Replacing the Hard Disk Drive Module
- Replacing the WLAN Module
- Replacing the DIMM Modules
- Replacing the Lower Cover
- Replacing the SD Dummy Card
- Replacing the ExpressCard Dummy Card
- Replacing the Battery
- Troubleshooting
- Common Problems
- Power On Issue
- No Display Issue
- Random Loss of BIOS Settings
- LCD Failure
- Built-In Keyboard Failure
- Touch Pad Failure
- Internal Speaker Failure
- Internal Microphone Failure
- HDD Not Operating Correctly
- ODD Failure
- USB Failure (Rightside)
- Modem Function Failure
- Wireless Function Failure
- EasyTouch Button Failure
- MediaTouch Button Failure
- Fingerprint Reader Failure
- Thermal Unit Failure
- HDTV Switch Failure
- External Mouse Failure
- Other Failures
- Intermittent Problems
- Undetermined Problems
- POST Codes Tables
- Common Problems
- Jumper and Connector Locations
- FRU (Field Replaceable Unit) List
- Model Definition and Configuration
- Test Compatible Components
- Online Support Information
- Index
Chapter 2 39
Power
The Power screen allows the user to configure various CPU and power management options and device
wakeup behavior.
The table below describes the items, menus, and submenus in this screen. Settings in boldface are the default
and suggested parameter settings.
Parameter Description Option
C1E Configuration Enable or Disable C1E Dual-Core related
CPU power State.
Griffin Mode or Disabled
CPU Throttle Enable or disable CPU Throttle. Disabled or Enabled
CPU Spread Spectrum Enable or disable CPU Spread Spectrum. Disabled or Enabled
iGPU Spread Spectrum Set the iGPU Spread Spectrum percentage. 1.00%, 2.00%, 3.00%,
4.00%, 5.00% or
Disabled
PCIE Spread Spectrum Enable or disable PCIE Spread Spectrum. Disabled or Enabled
SATA Spread
Spectrum
Enable or disable SATA Spread Spectrum. Disabled or Linear Down
PState Configuration Enable or disable ACPI PState Support Enabled or Disabled
USB CSC Resume Enable or disable wake up from S3 by USB
plug or unplug.
Disabled or Enabled
Cannot_Find_String Enable or disable the Cannot_Find_String
message during boot.
Disabled or Enabled
HIPM Enable or disable Aggressive Link Power
Management (HIPM).
Disabled or Enabled
SATA FPCI Clock Set the SATA low power control level. 133 MHz or 200 MHz
PCI Clocks Enable all PCI clocks or lock down all PCI
clocks to Port 80.
Enabled or Auto
PhoenixBIOS Setup Utility
Information Main Advanced Security Boot Power Exit
Item Specific Help
C1E Configuration [Griffin Mode] Enable or Disable
CPU Throttle: [Disabled] C1E Dual-Core related
CPU Spread Spectrum: [Enabled] CPU power State.
iGPU Spread Spectrum: [2.00% Triangular Centre]
PCIE Spread Spectrum: [Disabled] Auto enables C1E
SATA Spread Spectrum: [Linear Down] if dual core is
PState Configuration [Enabled] detected and disables
USB CSC Resume [Disabled] C1E if single core
Cannot_Find_String [Disabled] is detected.
HIPM [Disabled]
SATA FPCI Clock: [133Mhz]
PCI Clocks: [Enabled]
AltVid [Disabled]
ASPM (L0s/L1s) [Disabled L0s]
PCIE Lane Swizzle: [Disabled]
F1 Help
↑↓
Select Item F5/F6 Change Values F9 Setup Defaults
ESC Exit
←→
Select Menu Enter Select
X
Sub-Menu F10 Save and Exit