Owner's Manual

English

6 Select the desired driver/application and follow the instructions on screen

to re-install.

At first launch, Acer eRecovery prepares all the needed software and may take

few seconds to bring up the software content window.

Change password

Acer eRecovery and Acer disk-to-disk recovery are protected by a password that

can be changed by the user. Follow the steps below to change the password in

Acer eRecovery.

1 Boot to Windows XP.

2 Press <Alt> + <F10> to open the Acer eRecovery utility.

3 Enter the password to proceed. The default password is six zeros.

4 In the Acer eRecovery window, select Recovery settings and click Next.

5 In the Recovery settings window, select Password: Change Acer eRecovery

password and click Next.

6 Follow the instructions on screen to complete the process.

Note: If the system crashes, and will not boot to Windows, you can

run Acer disk-to-disk recovery to restore the factory default image

under DOS mode.