User Guide
Chapter Four : Using Your ARMC Card
41
Health of the ARMC Card
The ARMC Health Information screen is a subsection of the Information group. The
following table describes the information listed in this subsection in detail:
Field Description
Functional This health status means that the ARMC card is
operating within normal parameters.
Warning This health status means that the ARMC card is
operating within warning parameters.
Critical This health status means that the ARMC card is
operating within critical parameters.
ARMC Health Status
On Battery This health status means that the ARMC card is
operating using the on-board board battery.
Note: The on-board battery is an optional
component.
Functional This health status means that the host system is
operating within normal parameters.
Warning This health status means that the host system is
operating within warning parameters.
Overall Host Health
Status
Critical This health status means that the host system is
operating within critical parameters.
ARMC 3.3V This field gives the current 3.3 V voltage reading that is measured at
the ARMC card.
ARMC 5V This field gives the current 5 V voltage reading that is measured at
the ARMC card.
PCI 12V This field gives the current PCI 12 V voltage reading that is
measured at the ARMC card.
PCI 3.3V This field gives the current PCI 3.3 V voltage reading that is
measured at the ARMC card.
PCI 5V This field gives the current PCI 5 V voltage reading that is measured
at the ARMC card.
ARMC Wall Adapter
(6V)
This field gives the current voltage coming from the wall adapter that
is plugged into the back of the ARMC card.
Note: You can ignore this field if you do not have an AC/DC
power adapter installed.
Cont’d