User Guide

Connecting the Video Cable: the monitor comes with a built-in video cable.

Plug the signal cable′s 15-pin connector into the computer's video port and

tighten the two screws on the cable connector.(see figure 2)

Caution:Don’t bend the signal cable, otherwise it will break the inner wire.

Connecting the Power Cord: Plug the power cord into the monitor's AC

power jack. Then plug the power cord into a grounded AC outlet, UL-

approved power strip, or the power output socket on your PC.

Caution: If the AC outlet is not grounded (only two holes), install the

proper grounding adapter (not supplied).

Figure 2 Connecting Cables

1. Power Cord 2. Signal Cable