Technical information

Chapter 2 39
Integrated Peripherals
Parameter Description Option
USB 2.0 Controller Enable this item if the system supports USB
2.0
Enabled
Disabled
USB Function This item is used to enable or disable the
on-chip USB
Enabled
Disabled
Legacy USB Support This item allows you to enable or disable
Legacy USB support
Enabled
Disabled
Onboard AUDIO Function Enabling the on-die audio if no add-on PCI
audio device
Enabled
Disabled
Onboard LAN Function Enables and disables the onboard LAN Enabled
Disabled
LAN Boot ROM Support This function decide whether to invoke the
boot ROM of the onboard LAN chip
Enabled
Disabled
Serial Port 1 Address This option is used to assign the I/O
address and interrupt request (IRQ) for
onboard serial port 1or 2
Auto : BIOS will automatically
setup the port 1 or 2 address
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Diabled
Serial Port 2 Address
Parallel Port Address Use this item to enable or disable the onboard Parallel port, and to assign a
port address.
USB 2.0 Controller [Enabled] Item Help
USB Function [Enabled]
Legacy USB Support [Enabled] Menu Level X
Onboard AUDIO Function [Enabled]
Onboard LAN Function [Enabled]
LAN Boot ROM Support [Enabled]
Serial Port 1 Address [3F8/IRQ4]
Serial Port 2 Address [Disabled]
Parallel Port Address [378]
Parallel Port Mode [ECP]
EPP Version [1.9]
Parallel Port IRQ [IRQ7]
KLIJ: Move Enter: Select +/-/: Value F10:Save ESC: Exit F1: General Help
F9: Default Settings
CMOS Setup Utility-Copyright © 1985-2004, American Megatrends, Inc,
Integrated Peripherals