User Guide

Other Correspondent Remote Functions and Messages
English 22
OSD FUNCTION
Source
The selected source will be displayed
at the bottom right of the screen for
3 seconds after selecting the source.
(PC, VIDEO, S-VIDEO).
Freeze
The image will be frozen when the
“Freeze” button is pressed. A “ ∥ ”
mark appears at the lower right of the
screen for 3 seconds during the freeze
function. Furthermore, a “4” mark
appears at the lower right of the
screen for 3 seconds when freeze is
released. “Freeze” is released when
the source button or the “Freeze”
button is pressed again.
Mute
Press the “Mute” button and the sound
will be muted. There will be an OSD
message as shown below:
Press Mute again or the volume
+/- buttons to turn off the mute.
Volume
Press volume + or – buttons to adjust
the volume. The OSD message below will
appear: (The message will disappear
automatically 3 seconds after the
volume is adjusted.)
Magnify
By pressing the magnify “+” button,
the center of the picture can be
magnified. Press the button again, and
the image will be further magnified
(to a maximum of 4X). Press the
magnify “-” button, and the size of
the magnified image will be reduced by
50 percent. To return to the normal
display mode, press the “Return”
button.
Laser
Press this button to generate the
laser beam.
Disk Pad
If users connect the PS2 (ADB) mouse
cable on the projector with the
PC/Notebook (Macintosh/ Powerbook)
mouse port, the disk pad will be able
to function as a PC/Notebook