User's Manual

Product Engineering Specification
Document
PES-K33441
Rev
0.3
March 3, 2008
Confidential
Page 7 of 19
2.3 Button Functions
1. -Speed dial buttons: x 3
a. -When on a call, if the user presses & holds a speed dial button, the number for
that call is stored in memory.
b. -When not in a call, if the user briefly presses the speed dial button, that number
will be dialled by the cell phone and the call will be connected to the BT
handsfree kit.
c. If an incoming call is from one of the Speed dial numbers, the LED behind the
speed dial button will flash.
2. -Call/Answer & -Call End (One button)
3. -Volume slider (rheostat)
4. -Power
5. -Pair (recessed) / Driver Swap
a. Press and hold to start pairing process with a new phone.
b. Quick press to disconnect from currently paired phone & attempt to reconnect
with the next phone in the buffer.
See interface specification for more detailed description of button functions & actions.
2.4 Display Functions
Indicators LEDs
-Power on / Low power
-Pairing Mode/ Paired
-Speed dial Presets (3x)
See interface specification for more detailed description of button functions & actions.