User`s manual

DLP Projector—User’s Manual
-104-
TEST MAIL
Send a test mail to check if your settings are correct. Click to “Execute” to enable this feature.
Test Mail Status Button: Click to display the test result.
Sample of a message sent from the projector:
Projector Name: X X X X
Lamp 1 or 2 Hours Used: xxxx [H]
The lamp is at the end of its usable life. Please replace the lamp.
Note:
If you entered an incorrect address in a test, you may not receive an Alert mail. Should this happen,
check if the Recipient's Address is correctly set.
Unless any one of the [Sender's Address], [SMTP Server's Name] or [Recipient's Address 1-3] is
selected, [Test Mail] is not available.
PJLINK
This option allows you to set a password when you use the PJLink feature.
On/Off: Enable or disable the password.
Password: Enter a password (up to 32 characters)
Note:
PJLink is a standardization of protocol used for controlling projectors of different manufacturers. This
standard protocol is established by Japan Business Machine and Information System Industries
Association (JBMIA) in 2005.
The projector supports all the commands of PJLink Class 1.
PROJECTOR INPUT PJLINK INPUT PARAMETER
Computer 1 RGB 1 11
Computer 2 RGB 2 12
Video VIDEO 1 21
S-Video VIDEO 2 22
Component VIDEO 3 23
Computer 3 DIGITAL 1 31