Z-2000 Z-3000 Owner Guide Air Purifier with SensorPod™ and filtration
General Safety Information ENG PLEASE READ AND SAVE THESE INSTRUCTIONS This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
ISED Compliance This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.
Experience the difference ENG SensorPod™ PureDirect™ technology Remote air quality monitor that ensures cleaner air, right where you need it Proprietary bi-directional airflow distributes clean air comfortably and efficiently Informs and adapts 360° Purification Illumination color ring and numeric display communicate air quality in real-time Surrounding air is drawn in from all directions through a 3-stage filter and sterilizing UV lamp Thoughtful execution Exceptional functionality wrapped in a
Getting started ENG Step 1. Placement of the purifier and SensorPod Place the purifier on a flat surface along a side wall, free from obstructions: where air can flow freely into the purifier from all sides avoiding furnishings like bedding and curtains, as well as sources of heat or moisture. Place SensorPod on a counter or table away from the purifier to increase coverage across the room. Sample Bedroom Sample Living Room Step 2.
Get to know your air purifier ENG 1 2 3 1. Easy-carry handle 2. Soft-touch control panel 3. Air quality indicator ring 4. 360° air intake 5. Filter chamber cover & knob (underneath) 4 5 Introducing your remote air quality monitor, SensorPod™ The separate air quality sensor can more accurately represent the air quality in your room by monitoring the air away from the purifier, ensuring greater coverage of cleaner air. 1. Power and Signal Indicator 1 2 3 2. Air outlet 4 3. Air inlet 4.
PureDirect™ cleans comfortably and efficiently ENG By splitting the purified air into two distinct and directed streams, PureDirect provides a unique and proprietary airflow that cleans the room up to 24% faster. filtration and UV sterilization Washable Pre-Filter Captures larger particulates, like dust and pet hair Activated Carbon Filter Removes certain gases and odors HEPA Filter Captures particulates down to 0.
Control Panel ENG Power Button Fan Speed Settings Select fan speed or AUTO mode. In AUTO mode, purifier automatically adjusts fan speed based on air quality readings from SensorPod. (AUTO mode only available when purifier is paired with SensorPod and receiving signal.) Dimmer Mode Display illumination turns off – for use while sleeping. Simply press the button again to bring back all display features. (Purifier will continue operating at fan speed or AUTO mode as selected by user.
Specifications ENG Z-2000 Z-3000 Medium Room Purifier Large Room Purifier Area changed every 15 minutes 188 ft² (17 m²) 375 ft² (35 m²) Area changed every 30 minutes 375 ft² (35 m²) 750 ft² (70 m²) SensorPod™ Included Works up to 49 ft (15 m) across a room from the purifier.
Specifications ENG SensorPod Medium & Large Rated operational voltage 9V DC Rated operational current 0.15A DC ±10% Adapter input voltage range 90 ~ 240V AC 60±3Hz/50±3Hz Adapter output power DC 9V 0.15 Rated power 1.3±0.3W Signal frequency 2462MHz Channel bandwidth 1MHz Wireless transmit power 0dBm Receive Sensitivity Radio frequency modulation mode Onboard antenna gain Sending and receiving distance Product dimensions Warranty -94dBm@250kbps GFSK 2 ~ 3dBm open space≥15m 80*45.
Filter Change and Maintenance ENG Accessing the filter chamber -Always power off the purifier by pressing the Power Button and unplugging the power cord. -Gently place the unit on its side so that the filter chamber cover and knob are exposed. -Turn the knob counter-clockwise and remove (Fig A). -Gently remove the filter chamber cover and the 360° HEPA filter drum that is attached (Fig. B). Fig. A Replacing the 360° 1. 2. 3. 4. 5. 6. 7. Fig.
Filter Change and Maintenance ENG Fig. E Replacing the Carbon filter 1. 2. 3. 4. 5. 6. 7. The indicator will glow red when it is time to replace only the Carbon layer. Gently peel away the Prefilter from its fastener strips. Gently peel away the old Carbon layer from its fastener strips. Your replacement 3-pack of Carbon filters (on page 7) will cover each of the three Carbon changes between changes of the entire HEPA drum filter assembly (see above).
ENG Replacing the UV lamp 1. 2. 3. 4. 5. 6. 7. The indicator will glow red when it is time to replace the UV lamp. Once the filter drum is removed (Fig. A, Fig B), use a screwdriver to remove the 4 screws securing the UV housing (Fig. G). Gently remove the UV housing (Fig. H). Disconnect the plug of the UV lamp from the socket within the purifier (Fig. I). Your replacement UV lamp will plug directly into the same socket (Fig. J).
Pairing SensorPod and Purifier ENG The SensorPod communicates with the purifier using radio frequency signals, and will be paired on the production line and ready for use when you open the box. In the rare event that the signal is interrupted, you can repair the connection in just a few easy steps.
Troubleshooting and FAQ Where do I place the SensorPod? ENG Anywhere you want to measure the air quality within the room! For optimal performance, place the SensorPod away from the air purifier on a counter or table. In Auto Mode, the purifier will work to distribute clean air until the SensorPod reads an acceptable level of air quality. See specification table on page 7 for appropriate room sizes for each model.
Support ENG THANK YOU for allowing TruSens to join you on your journey towards wellness. If you have any questions that are not answered in this product manual, please reach out! Call the TruSens helpline at 1-833-TRU-SENS (1-833-878-7367) Email us at support@trusens.
Version 0, November 2018 Experience the difference www.trusens.