Owner's Manual

Table Of Contents

PAGE 1
PAGE 2
PAGE 3
II.Installation pre BY ee] df THI, | Video (out) 0 y Tamers / A -{o— +12V(in) ® Yellow socket is connected to video ® Power sockets connected to DC12V Monitor Mount the camera inside the keyhole of your vehicle. Adjust the lens of the camera to its best position.Connect Power cord(black) to connect to your vehicle DC12V power system.Connect the video output(yellow) of the camera to the display in your vehicle. III.Features Uses with this item No more wonder what's going on in the back.
PAGE 4
PAGE 5
RVC1150T PROGRAMMING INSTRUCTIONS NO LOOPS CUT Picture: Upside down Image: Reverse Parking Lines: No WHITE LOOP CUT Picture: Right side up Image: Reverse Parking Lines: No BLUE LOOP CUT Picture: Right side up Image: Reverse Parking Lines: Yes NOTE: IF ANY CHANGES TO BE MAKE ON THE CAMERA. YOU MUST FIRST POWER DOWN THE CAMERA THAN MAKE YOU'RE CHANGES. AFTER YOU FINISHED YOU CHANGES POWER UP THE CAMERA AGAIN THE CAMERA WILL AUTOMATIC SAVE THE PROGRAMMING.