Manual

Safety information

Explanation of symbols

The following symbols are used in this manual and on the device:

Symbol

Signal word

Meaning

Warning

Indicates risk of injury or health hazards.

Warning

Indicates risk of injury or health hazards caused by

electrical voltage.

Important

Indicates possible damage to device/accessories.

Note

Indicates important information.

Warning

 The smoke detector does not detect gas, steam, heat or fire/flames. Detectors

with special sensors are required for this.

 People with hearing impairments may not be able to hear the alarm. Special

alarms with visible signalisation are available for such cases.

 Smoke detectors help save lives. Therefore, for safety’s sake, you should

regularly test the battery and the operation of the detector. For day-to-day use,

remember that the smoke detector cannot prevent fires but simply provides

signalization in the event of one. For your own safety, please replace smoke

detectors every ten years at the latest.

 Very high electromagnetic radiation can cause malfunctions. Therefore, do

not install the detector near strong magnets or devices which produce

electromagnetic radiation.

The smoke detector works optically by measuring smoke particles that penetrate into its

measurement chamber.

When the alarm threshold is exceeded, a loud alarm sounds.

The alarm is switched off as soon as there is no more smoke in the measuring chamber.

 Surveillance area: 40 m

within a room

 Battery operated (1 x 9 V battery)

 Automatic battery state monitoring

 Battery compartment check (the smoke detector can only be installed when the

battery is fitted)

 Optical LED indicator lamp and acoustic alarm

 Simple installation