Installation Manual

ManualsBrandsABUS ManualsFor HomeFU8007 Secvest 2WAY Base Kit

Now program the F3 function key on the arming station.

Call up the installer menu.

Under Other Devices, select the Arming station menu point.

Under Edit arming station, select the trained Arming station 1.

The trained arming station is indicated by the symbol.

Now

select the F3 key.

Select the Output number menu point.

Now select the (HW)Output 01

Select the Impulse function (approx. 4 seconds).

Go back to the installer menu and change Output 01 to the user defined setting.

Under Outputs, select the Edit output menu point.

Edit Output 01 and select User Defined as type.

Now go back to the operating mode.

You can now switch output 01 using the F3 function key.

Arming statio n (1) F3

(HW)Output 01

(HW)Output 02

(RF)Output 03

(RF)Output 04

Select Back

INSTALLER MENU

Other Devices

Select Close

OTHER DEVICES

Ext Sirens

Info Module/ Int Sirens

WAM

Arming station

Select Back

Edit arming station

Arming station 1

Arming station 2

Arming station 3

Arming station 4

Select Back

ARMING STATION (E)

Add/Del arming station

Edit arming station

Select Back

Edit arming station

F1 key

F2 key

F3 key

F4 key

Select Back

Arming statio n (1) F3

Full Set

Part Set

Unset

Output number

Select Back

Arming statio n (1) F3

Off

Toggle

Impulse

Select Back

INSTALLER MENU

Outputs

Select Close

OUTPUTS

Add output

Edit output

Select Back

(HW)Output 01

Name: Output 01

Type: User Defined

On at: 00 : 00

Off at: 00 : 00

Edit Back

(HW)Output 01

Name: Output 01

Type: Not used

Edit Back