User's Manual

18 -

Confirm network key: Enter network key again to confirm.

When encryption is set to WPA 802.1X/ WPA2 802.1X/ WEP

802.1X…

When users use radius server to authenticate client certificate for WPA

authentication mode (WPA authentication do not support EAP Method-

MD5-Challenge).

EAP TYPE:

• TLS: Transport Layer Security. Provides for certificate-based and

mutual authentication of the client and the network. It relies on

client-side and server-side certificates to perform authentication and

can be used to dynamically generate user-based and session-based

WEP keys to secure subsequent communications between the WLAN

client and the access point.

• LEAP: Light Extensible Authentication Protocol. It is an EAP

authentication type used primarily in Cisco Aironet WLANs. It

encrypts data transmissions using dynamically generated WEP keys,

and supports mutual authentication.

• TTLS: Tunnelled Transport Layer Security. This security method

provides for certificate-based, mutual authentication of the client and

network through an encrypted channel. Unlike EAP-TLS, EAP-TTLS

requires only server-side certificates.

• PEAP: Protect Extensible Authentication Protocol. PEAP transport

securely authentication data by using tunnelling between PEAP clients

and an authentication server. PEAP can authenticate wireless LAN

clients using only server-side certificates, thus simplifying the

implementation and administration of a secure wireless LAN.

 MD5: Message Digest Challenge. Challenge is an EAP

authentication type that provides base-level EAP support. It

provides for only one-way authentication - there is no mutual

authentication of wireless client and the network.

Tunnel: This is enabled under TTLS and PEAP type. For TTLS, the

selections of tunnel are CHAP, MSCHAP, MSCHAP-V2, PAP. For

PEAP, the selections of tunnel are MD5, GTC, TLS and MSCHAP-V2.

Username: Enter the username for server.

Identity: Enter the identity for server.

Domain: Enter the domain of the network.

Password: Enter the password for server.

Certificate: Choose server that issuer of certificates.

Remove

Click Remove button to delete selected profile.

Edit

Click Edit button to edit selected profile.

Duplicate

Click Duplicate button to copy selected profile.

Set Default

Click Set Default button to set selected profile to be connected first.