User's Guide

DIGITAL DRY TRANSFOR MER
2019-03-19 23/57
5.9.1.2 Ethernet IP Configuration
The TXpert supports static IP addresses
for the Ethernet connection. The de-
fault addresses are shown in Figure 17.
To change the configuration, enter the
new values then select the Update
Ethernet IP button. The TXpert will reset
and you must re-establish the connec-
tion.
It is recommended that you give every
TXpert on your network a unique IP con-
figuration.
5.10 About View
5.10.1 Copyright
The Copyright view displays the copyright information of the software used on TXpert.
Figure 17