User Manual

© 2008 4IPNET, INC.
102
4ipnet
MSG
100
User
’
s
Manual
Step 4: Configure Authentication Settings for SZ1
• Check the Enabled radio button to enable Authentication Required for the Zone.
• Check the Default button and Enabled box of Server 1 to set LOCAL authentication method
as default. Disable all other authentication options.
Step 5: Set Policy SZ1
• Select Policy 1 from the drop-down list box.
• Click Apply to activate the settings made so far. A warning message “ You should restart
the system to activate the changes.” will appear at the bottom of the page. Do NOT restart
the system until you have completed all the configuration steps.
Step 6: Configure Service Zone 2 for Guests
• Follow Step 2 to Step 5 to configure SZ2.
• In the Authentication Settings section, check the Default button and Enabled box of Guest
Users to set ONDEMAND authentication method as default. Disable all other authentication
options.