User Manual

56 CHAPTER 4: INSTALLING THE NETWARE CLIENT AND SERVER DRIVERS
Verifying the PCI Slot Number
To verify the PCI slot number in which a NIC is installed:
1 Boot the NetWare server with the -na option.
This prevents the AUTOEXEC.NCF file from loading. For
example, enter:
server -na
2 Issue the load command for the NIC LAN driver
without a slot parameter.
For example, enter:
load c:\nwserver\3c90x.lan
3 NetWare lists the valid slot number(s) for the NIC,
depending on how many NICs are installed. The
values appearing in the list are the slot values that
you should use.
book Page 56 Thursday, July 29, 1999 12:23 PM