Mini Multi functional Household Sewing Machine Instruction Manual | Please read the Instruction Manual carefully before operating the sewing machine. ® Please save this manual in a safe place. » The Machine is for Household Use only.
APPLICABLE CLOTH FOR SEWING Please read all instructions before using this appliance and keep the instructions for future reference Sewing Cloth Presents Cotton / Linen Silk / Wool Polyester Elastic IMPORTANT SAFETY INSTRUCTIONS Fabric specif This sewing machine is for domestic use only. Do not use outdoors. Regular Powered by an AC/DC adapter.
Front view Take up lever Uj thread idiom Li Pattern selection dial Thread Cutter Light Beadle of fee ame Bottom bobbin Handwoven! Reverse button Power off & speed switch AME OF PARTS TROUBLESHOOTING Back view Bobbin winder Rly Bobbin winder stop. w iL i Foot pedal input: Bobbin winder fo. tension disk a 1 Preservationist tT ..
FEATURES CONNECTING THE SEWING MACHINE TO THE MAINS POWER SUPPLY ADJUSTING STITCHING 1. Make sure the “power OFF/L & H speed switch” is on the "OFF" position. 1. As shown in the picture (Ref: Fig.A) normal stitching shall be neat with 2. Connect the jack Position A to the DC input socket on the back of the top and bottom threading neither too tight nor too loose. sewing machine, and connect the two-pin plug Position B into the Top th Main power supply. rend 3.
Threading upper thread Caution: When threading the sewing machine make sure that the“power OFF/L & H speed switch”is in the OFF position and follow the steps-6 below. Turn hand wheel counter clockwise until the needle is in the highest position. NEEDLE REPLACEMENT CAUTION: Remove the batteries and/or disconnect the AC/DC adapter before starting to replace the needle. 1. Turn the hand wheel to raise the needle to its highest position. 2. Hold the old needles and loosen the needle clamp screw.
‘RUES 12 STITCH PATTERNS 1. The sewing machine has a choice of 12 different stitch patterns, To select the stitch you require, look at the diagrams numbered 1-12 on the front of the sewing machine, choose the corresponding number on the dial which is lined up with the arrow. For example, to select zigzag stitch (diagram number 6), simply turn the selector dial until the number 6 on the dial is lined up with the arrow. 2.
PRESSER FOOT REPLACE ME] . Removing the Presser Foot: Tum the hand wheel counterclockwise to raise the needle to its highest position(Ref: Fig. A). Raise the presser foot lifter, and press the presser foot locking lever. The presser foot will drop off automatically from the locking device. (Ref: Fig. B) . Installing the Presser Foot: Put the presser foot under the presser foot locking device, lower the presser foot lifter(Ref: Fig.