ПАТОН Inverter Air Plasma Cutting Machine

(This text is machine translated) The inverter air-plasma rectifier PATON™ PRI-40S is designed for cutting metals with a plasma arc in an air stream with a current of up to 40A. current A built-in protection unit against high and low voltage Due to the built-in non-contact arc ignition and indirect arc, the most difficult process in cutting is greatly facilitated - the moment of formation of the main cutting plasma jet and entering the operating cutting mode By increasing the frequency of the applied voltage, the transformer is ten times smaller , as a result of which the device has several times less weight and overall dimensions with the same output parameters compared to classical equipment. o260V Adapted to a standard household power supply. Due to the high efficiency, the source consumes half the electricity compared to traditional sources The adaptive fan speed increases when the device heats up and slows down when it cools, which saves fan life and reduces the amount of dust in the device Comfortabl...