ПАТОН Invertor appatar air-plasma cutting

The PATON ™ PRI-40S inverter air-plasma rectifier is designed to cut metals with a plasma arc in a stream of air with a current of up to 40A. current Built-in overvoltage and undervoltage protection unit. Due to the built-in contactless ignition of the arc and indirect arc, the most difficult process in cutting is greatly facilitated - the moment the image Because of the increase in the frequency of the applied voltage, the transformer is less by tens of times, as a result of which the device has several times less weight and overall dimensions with the same output parameters as compared to the classical equipment In addition to protection against voltage surges a stabilization system has been installed for large long-term voltage drops in the supply network from 170V to 260V. Adapted to a standard household power supply network. Due to the high efficiency, the source consumes half the electricity compared to traditional sources. Adaptive fan speed increases when the machine heats up and slows down when co...