User's Manual

ManualsBrandsZYWELL ManualsComputers & AccessoriesThermal Printer

Table Of Contents

Remove the used roll paper core if any,and insert the roll paper.

The correct direction of the paper is shown in the illustration below.

1. Double-click

"POS Printer Driver V8.11"

2. USB driver installation or

Serial port driver installation

3) Select OK.

1) Select USB port and printer type;

2) Click Start Installation.

4) Select YES to print the test page

and check the printer driver name;

5) Installation is complete.

USB driver installation port

WIFI

Button name,indicator LED light and function

Feed Button

Press to feed paper manually.

Paper Indicator(LED Light):

Blue and red lights are on means lack of paper,

no alarm means all goes well.

Error Indicator:

When out of paper,cutter or printing head

overheat occurred,the ALARM indicator twinkles.

Power Indicator:

Light is on means connected properly.

Printer connected power and keep off status, then press the

“FEED”button and turn on the power, after hear the beeper

sounds, release "FEED button", acompleted self test paper will

be printed and show printer settings.

Self Test

TIPS

CONNECT PRINTER

STEP 1 - CONNECT PRINTER

User's manual

OUTLOOK AND INSTALL PAPER ROLL

STEP 2 - INSTALL DRIVER

Selftest

Firmware Version:

Speed:260mm/s

Command mode:EPSON(ESC/POS)

Firmware modify:2021/07/28

Cutter enable:Yes

Beeper enable:Yes

Black mark mode:No

Density Level:5(Max=8)

Char

line FontA/B:48/64

Default ASCII Font:FONTA

Default code page:Page0

Chinese character:No

USB&WIFI Interface

USB port fixed:Yes

USB Port mode:USB Printing

MAC address 00-CA-D6-CD-33-25

IP address:192, 168.1.100

Subnet Mask:255.255, 255.0

Gate Way:192.168.1.1

Code Page:

0:PC437(Std. Europe)1:(Katakana)

2:PC850(Multilingual)3:PC860(Portugal)

4:PC863(Canadian)5:PC865(Nordic)

6:(West Europe)7:(Greek)

8:(Hebrew)9:(East Europe)

10:(Iran)11:(WPC1252)

12:PC866(Cyrillic#2)13:PC852(Latin2)

14:(PC858)15:(IranII)

16:(Latvian)17:(Arabic)

18:(PT1511251)19:(PC747)

20:(WPC1257)21:(Thai)

22:(Vietnam)23:(PC864)

24:(PC1001)25:(Uigur)

26:(Hebrew)27:WPC1255(Israel)

28:PC437(Std. Europe)29:(Katakana)

30:PC437(Std. Europe)31:PC858(Mult)

32:PC 852(Latin-2)33:PC860(Portugu)

34:PC861(Icelandic)35:PC863(Canadian)

36:PC865(Nordic)37;PC866(Russian)

38:PC855(Bulgarian)39:PC857(Turkey)

40:PC862(Hebrew)41:PC864(Arabic)

42:PC737(Greek)43:PC851(Greek)

44:PC869(Greek)45:PC928(Greek)

46:PC772(Lithuanian)47:PC774(Lithuan)

48:PC874(Thai)49:WPC1252(Latin1)

50:WPC1250(Latin-2)51:WPC1251(Cyril)

52:PC3840(IBM-Russian) 53:PC3841(Gost)

54:PC3843(Polish)55:PC3844(CS2)

56:PC3845(Hungarian)57:PC3846{Turkish)

58:PC3847(Brazil-ABNT) 59:PC3848(Brazil)

60:PC1001(Arabic)61:PC2001(Lithuan)

62:PC3001(Estonian-1)63:PC3002(Eston-2)

64:PC3011(Latvian-1)65:PC3012(Latv-2)

66:PC3021(Bulgarian)67:PC3041(Maltese)

68:PC852(Croatia)69:VISCII

70:WPC1256(Arabic)

Code page: page 0

0 stands for

PC437(Std. Europe)

Selftest

Code Page

CONNECT PRINTER

Tips: Product design and specifications are subject to change without prior notice.

Summary of content (3 pages)

PAGE 1
OUTLOOK AND INSTALL PAPER ROLL User's manual STEP 1 - CONNECT PRINTER Button name,indicator LED light and function Power Indicator: Light is on means connected properly. Error Indicator: When out of paper,cutter or printing head overheat occurred,the ALARM indicator twinkles. Paper Indicator(LED Light): Blue and red lights are on means lack of paper, no alarm means all goes well. Feed Button Press to feed paper manually.
PAGE 2
INSTALL DRIVER WIFI driver installation 3) Set the IP of the printer WiFi (note that the IP needs to be set in the same gateway as the home network), and the printer is connected to the home network; 5) Click Start Installation. 1. Double-click "Printer Test V5.1C" 2.WIFI driver installation 1) Insert USB cable, select USB connection, and select "advanced" 6) Select YES to print the test page and check the printer driver name; 4) Use "POS Printer Driver V8.
PAGE 3
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.