VIZIO QUICK START GUIDE Model: S2120w-E0
IMPORTANT SAFETY INSTRUCTIONS Your Unit is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent your Unit from being damaged, the following rules should be observed for its installation, use, and maintenance. Please read the following safety instructions before operating your Unit. Keep these instructions in a safe place for future reference. • Read these instructions. • Keep these instructions. • Heed all warnings.
PACKAGE CONTENTS High Definition Sound Stand Remote Control with Batteries This Quick Start Guide Stereo RCA to 3.
CONTROLS & CONNECTIONS Front of Sound Stand LED Indicators 12 LED indicators will give visual feedback when you press buttons on the remote control.
Back of Sound Stand SUB OUT SUB OUT SUB OUT Subwoofer Out Power Port AUX (1) Analog Audio In DIGITAL (3) Coaxial In OPTICAL (4) Digital Optical Audio In Service/USB Port Service Port/USB In AUX (2) Analog Audio In 3
Side of Sound Stand Power Input Bluetooth Input (Hold to force pair, See Bluetooth Pairing for more information) Volume Up/Down 4
FIRST-TIME SETUP 1 Important: The Sound Stand is designed to hold TVs up to 56” in size with a weight of up to 60 lbs. The TV base should not be larger than 12.5” by 14”. Place the Sound Stand on a flat, stable level surface. VIZIO recommends that you first place your TV alongside the Sound Stand so that you have access to the connection ports.
Back of Sound Stand 2 SUB OUT SUB OUT GOOD 3.5MM TO RCA CABLE BETTER GOOD DIGITAL OPTICAL CABLE* 3.5MM TO RCA CABLE BETTER DIGITAL COAXIAL CABLE* CHOOSE ONE CABLE: GOOD BETTER AND CONNECT IT TO YOUR TV Note: Not all TVs have the audio outputs shown above.To connect the Sound Stand directly to your other devices (Blu-ray player, game system, etc) see your device’s user manual.
XIAL 3 Connect the power cable to the sound stand. Plug the power cable into a power outlet.
4 Center your TV on top of the Sound Stand. Be sure that your TV’s base fits completely on top of the Sound Stand and does not hang off the edges. Note: Do not place any items other than the TV on the Sound Stand.
5 6 Top Remove the battery cover by gently sliding it away from the remote. Top Insert the included batteries and gently slide the battery cover back into place.
7 Turn your TV on, the Sound Stand will automatically turn on and begin searching for an active input. The LED indicators on the front of the Sound Stand will begin cycling in pairs through inputs until an audio source is detected.* Tip: Pressing the INPUT button will stop the auto detect function. You can press the Input button to switch between audio sources. For example, if you connected your TV to Input 1, set the Sound Stand to Input 1. Hardware setup is complete.
USING THE REMOTE Bluetooth Press to enter Bluetooth input. Input Press to change input source. (To enter force pair mode, press and hold for 5 seconds) Power Press to turn on or off. Enter/Play/Pause Press to select an option. Press to play or pause. Volume + Press to increase volume. Previous Press to return to previous track. Next Press to skip to the next track. (Changes Treble and Bass levels) (Changes Treble and Bass levels) Volume – Press to decrease volume.
LED INDICATORS The LED Indicators give visual feedback when you press buttons on the remote control. Function LED Behavior Description Analog Audio In - AUX (1) Press the INPUT button on the remote to cycle through each available input: Analog Audio In - AUX (2) Coaxial In - Digital (3) Input Digital Optical Audio In Optical (4) Bluetooth USB Device - USB Bluetooth Pairing DTS TruVolume On/Off DTS TruSurround On/Off (When searching for device) Flash from Left to Right and back continuously.
BLUETOOTH PAIRING To pair the Sound Stand with a Bluetooth device: 1. Press and hold the Bluetooth button on the Sound Stand or the Bluetooth button on the remote for five (5) seconds. When the Sound Stand is in Bluetooth Pairing Mode, the LED Indicators on the Display Panel on the front of the Sound Stand will light sequentially from left to right and back again. Once the device is paired, the LED Indicators will stop flashing. 2.
USING BLUETOOTH MODE Your Sound Stand supports music streaming from smartphones, tablets, and computers with Bluetooth capability. (Device compatibility will vary) See your device’s documentation for more information. Once you have paired your source device to the Sound Stand, as long as you stay within range of the Sound Stand, your device should remain paired, even if you change the input on the Sound Stand.
ADVANCED SETUP Connect up to five (5) different devices to the Sound Stand (devices shown are examples you can use any device). Back of Sound Stand SUB OUT To listen to a device, change the input source on the Sound Stand. Optical, Coaxial, and 3.5mm cables transmit audio only. If connecting a video device, you will need a separate video connection from the device to your TV. 3.5MM TO RCA AUDIO CABLE USB THUMB DRIVE* Game Console *Supports .WAV file format playback only. 3.
CONNECTING A SUBWOOFER Back of Sound Stand SUB OUT To connect a subwoofer: RCA Subwoofer Cable* Optional Subwoofer* *RCA subwoofer cable and subwoofer not included. 16 1. Press the BASS button on the remote control to enter bass adjustment mode. 2. Use the Previous/Next buttons to adjust the bass level to the center position. 3. Power Off the Sound Stand and Subwoofer. Connect an RCA cable from the Sound Bar to the Subwoofer. 4. Power On the Sound Stand and Subwoofer. 5.
USING BUTTON COMBINATIONS There are 3 Functions that are triggered by 3 different button combinations on the Sound Stand. Function LED Behavior Factory Reset All 12 LEDs will flash 3 times: VIZIO TV Remote Control Reset the Sound Stand to the factory default settings. To perform a Factory Reset, press and hold the Bluetooth( ) and Volume Down (—) buttons for 5 seconds. Note: This will erase all settings and preferences that you have set.
VIZIO RECOMMENDS Introducing the new E-series slim frame design. The VIZIO LED HDTV is shattering the mold in a way only VIZIO can, with high-quality design and picture at the best value. With a stunningly slim outer frame design – and LED backlight for rich colors and vivid details, this HDTV gives you the best picture at the best value. Available at www.VIZIO.
Take A Moment To Register Your Product At VIZIO.COM/PRODUCT-REGISTRATION Why Register? Customized Support Get assistance quickly with your information on-hand. News & Offers Take advantage of the latest news and special offers from VIZIO. Safety & Satisfaction Stay up to date with important product updates and notifications.
Do You Have Questions? Find Answers At SUPPORT.VIZIO.COM Find help with: • New Product Setup • Connecting Your Devices • Technical Problems • Product Updates • And More Live Chat Support Available You can also contact our award-winning support team at: Phone: (877) 878-4946 (TOLL-FREE) Email: techsupport@VIZIO.
HELP & TROUBLESHOOTING There is no power. • Press the POWER button on the remote control or on the top of your Sound Stand. • Ensure the power cord is securely connected. • Plug a different device into the electrical outlet to verify that the outlet is working correctly. There is no sound. • Increase the volume. Press Volume Up on the remote control or on the top of your Sound Stand. • Press MUTE on the remote to ensure the Sound Stand is not muted.
ONE-YEAR LIMITED WARRANTY LEG ON PARTS AND LABOR Covers units purchased as new in United States and Puerto Rico Only VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year of non-commercial usage and ninety (90) days of commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option and discretion.
LEGAL & COMPLIANCE ety (90) option ough VICE nt parts eturn upport oper allation outine ABILAND ERABLE ERCIAL MPLIED RRANTY TICE. FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IC warning This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
